Ek280 Operation And Display; Display Configuration; Main" Main Display - Honeywell EK280 Applications Manual

EK280

2 EK280 Operation and Display

2.1 Display configuration

2.1.1 "Main" main display

With the calibration lock open,
contents for the "Main" tab:
"Main" Description
volume +
Displayed: Volume at base conditions, volume at measurement conditions,
meas. pressure, temperature, compressibility and conversion factor with short descriptions
Meter reading format: 8 digits before and 3 digits after decimal point
volume short Displayed: Volume at base conditions and volume at measurement conditions with
short descriptions and header
Meter reading format: 8 digits before and 3 digits after decimal point
volume long Displayed: Volume at base conditions and volume at measurement conditions with
header but without short descriptions
Meter reading format: 9 digits before and 4 digits after decimal point
Volume, p,T,Q Displayed: Volume at base conditions, volume at measurement conditions,
pressure, temperature, standard load and operational load with short descriptions
Meter reading format: 8 digits before and 3 digits after decimal point
List Displayed: Volume at base conditions, volume at measurement conditions, total
number of DE1 inputs (initial number for connected Encoder), pressure,
temperature, conversion factor, compressibility, operational load, standard load,
date and time
Vb, Vo, meas. The following are displayed: Volume at base conditions, meter reading of the gas
meter (Encoder), pressure, temperature, compressibility ratio factor and conversion
factor with short descriptions.
Meter reading format: 8 digits before and 3 digits after decimal point
Vb,Vo,p,T,Q The following are displayed: Volume at base conditions, meter reading of the gas
meter (Encoder), pressure, temperature, standard load and operational load with
short descriptions
Meter reading format: 8 digits before and 3 digits after decimal point
Application Manual
"Main" on the "Ctrl." display tab allows you to select different views and
8