Honeywell EK280 Applications Manual page 95

EK280
The core ends should now look something like this:
i
Before inserting the cores into the plug, make sure that the core pairs are twisted as much as
possible. If they have "untwisted", twist them in pairs as much as possible before inserting into
the plug.
7.2.2.9 Inserting the cable into the EK280
− For this, the central plastic gland or the blind plugs have to be removed.
i
An A/F 20 wrench is required for the cable gland.
− Now push the prepared cable into the EK280 and tighten the cable gland.
Application Manual
The cores must remain twisted as far as possible.
93