Honeywell EK280 Applications Manual page 124

EK280
modem type "ECM-2G-UG350":
EK280_xvx.. - FE260 & ECM-2G-UG350 (GPRS) (*)
modem type "ECM-3G-UU270":
EK280_xvx.. - FE260 & ECM-3G-UU270 (GPRS) (*)
or
28 EK280_xvx.. - FE260 & ECM-3G-UU270 (UMTS) (*)
modem type "ECM-GW120" with the modem application "WipSoft":
EK280_xvx.. - FE260 & ECM-GW120 – WipSoft (GPRS) (*)
modem type "ECM-GW120" with the modem application "ComTCPserv":
EK280_xvx.. - FE260 & ECM-GW-120 - ComTCPserv (*)
modem type "Integra M2106" with the modem application "ComTCPserv":
EK280_xvx.. - FE260 & M2106+ (FW657e) – ComTCPServ (*)
i
When using the parameter file
the 2G network (GPRS). As such, the higher data rates which are possible in the 3G network
(UMTS) cannot be used.
When using the parameter file
the 3G network (UMTS), if it is locally available. The modem only uses the 2G network (GPRS) if
no 3G network is available locally. However beware: In the German 3G networks (Telekom,
Vodafone, O2), the CSD service (Circuit Switched Data) is not supported!!!!
Summary
If you want to use the CSD data transmission in Germany, you must also operate the modem in
the 2G network! In other countries, you may need to clarify the circumstances with your network
provider!
− For the following customized settings and tests required, press "Navigation" on the left-hand side
and then "Parameterize
i
All the values listed in enSuite under "Parameters" can be found on the "Serv." display tab of the
EK280 under the same path.
Set individual parameters in the case of ECM-GW120 with WipSoft, ECM-2G-UG350 and ECM-3G-UU270
− In the top of the device window open the path "Parameters" >
"GSM und GPRS".
− On the right-hand side of the window you will now see several values, in which the following must be
entered:
Value
GPRS Access Point Name "APN"
The "x" stands for the software version on the device, e.g. "2v5".
27
The star * stands for a small letter which indicates the version of the file, e.g. "a".
 next infoblock
28
Application Manual
"...ECM-3G-UU270 (GPRS)
"...ECM-3G-UU270 (UMTS)
online" at the bottom of the navigation window.
27
27 28
27 28
27
27
27
(*)" the modem generally logs into
(*)" the modem preferably logs into
"Terminal interface" and then select
Input
122