Archive Content; Memory Capacity - Honeywell EK280 Applications Manual

EK280

9.1.1 Archive content

Pos. Address Display
1 01:01F8 GONo
2 03:0A20 ABNo
3 01:0400 Time
4 02:0300 Vb
5 - ∆ Vb
6 02:0302 VbT
7 - ∆ VbT
8 04:0300 Vm
9 - ∆ Vm
10 04:0302 VmT
11 - ∆ VmT
12 19:0161 p.MP∅
13 15:0161 T.MP∅
14 23:0161 K.MP∅
15 25:0161 C.MP∅
16 02:0110 St.2
17 04:0110 St.4
18 07:0110 St.7
19 06:0110 St.6
20 02:0100 StSy
21 03:0A23 ErReg
22 03:0A22 Ev
23 03:0A21 Check
The values can be retrieved in accordance with the information in the table via D = display and/or
1
I = interface.
When using an encoder then the original operating volume "Vo" (01 240) can also be set.
2
The counter progress compared to the respective previous entry is denoted with a "∆". Normally it is a flow
(consumption) in this case within a measurement period. This, however, does not apply when an archive row
is entered due to a particular event (e.g. setting the clock or a counter, appearance of an important status
message). The meter reading flashes with the meter progress to point out this feature to the user (for further
information, refer to the instruction manual "usage as a registration device").

9.1.2 Memory capacity

Based on factory settings, the archive contains 9504 data rows, which corresponds to a memory capacity of
approx. 13 months with a measurement period of 60 minutes.
Application Manual
Description
Global Block number
Archive Block number
Date and time
Volume at base conditions
Meter progress Volume at base conditions
Volume at base conditions total
Meter progress Volume at base conditions total
Volume at measurement conditions
Meter progress Volume at measurement conditions
Volume at measurement conditions total
Meter progress Volume at measurement cond. total
Pressure mean value of last meas period
Temp. interval mean value
Mean value K of last meas period
Mean value C of last meas period
Instance-Status 2 (incl. Vn)
Instance Status 4 (incl. Vb)
Instance Status 7 (incl. p)
Instance Status 6 (incl. T)
System status
Error register
Event causing data line to be archived
Check sum result ( „CRC OK" or „Error")
Retrievable
S
A + S
A + S
A + S
A
A + S
A
A + S
A
A + S
2
A
A + S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
A
A + S
A + S
192
1