Honeywell EK280 Applications Manual page 76

EK280
7.1.6.3.7 Configuration of ComFTP application (PUSH transfer)
With regard to the configuration of the ComFTP application, separate instructions 0 ("ComFTP
Modem Application – Operating Instructions", ID No. 73022681) along with information regarding
commissioning instruction are available for download from www.elster-instromet.com.
i
We are also able to provide you with support regarding the commissioning of such ComFTP
systems during the course of minor projects.
Please contact our Technical Assistance Center at:
Phone:
Email:
i
The parameterization software enSuite may be used to set up the ComFTP application. A local
link to the modem (USB configuration cable) or a GSM/CSD link is required for this purpose.
Danger!
Ensure the mains voltage is disconnected before opening the EK280 housing, ensure it
is not turned back on and verify that there is no voltage.
Application Manual
+49 6134 605-123
ElsterSupport@Honeywell.com
Fig. 9: Local connection via USB programming cable
to the modem parameterization interface of the EK280
74