Table of Contents
Advertisement
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
Since the LCA interface does not provide any methods to set network
analyzer related parameters or to retrieve measurement data from the
network analyzer, most applications also need to program the network
analyzer. The network analyzer's native functions can be controlled either
using SCPI or COM. We recommend using the COM interface. This is
reflected in the programming examples.
Figure 1
LCA Remoting Architecture
While this chapter assumes you are familiar with your programming
environment, it does not assume familiarity with controlling remote objects
from within that environment.
Examples are provided for VB.NET, C#, VBA and Keysight VEE, which can
be extrapolated to most environments for controlling the LCA. After
installing the LCA Remote Client on your computer, you can find these
examples in the folder:
C:\Program Files\Agilent\Agilent LCA Remote Client
(on 32-bit systems)
C:\Program Files (x86)\Agilent\Agilent LCA Remote Client
(on 64-bit systems)
Remote Operation
1
7
Advertisement
Table of Contents
