Keysight N437 Series Programmer's Manual page 48

1 Remote Operation
48
Example :NWA:MOD? -> N5245A
Command :NWA:PORT:NUMBer?
Syntax :NWA:PORT:NUMBer?
Description The number of network analyzer ports
Parameters none
Response integer
C# (property) NumNWAPorts
Example :NWA:PORT:NUMBer? -> 4
Command *OPC?
Syntax *OPC?
Description Retrieves the operation complete state
Parameters none
Response <string> 0 | 1
C# (method) OperationComplete()
Example *OPC? -> 1
Command :PARameter:ADVAnced:MODE?
Syntax :PARameter:ADVAnced:MODE?
Description Returns 1 if advanced mode is enabled. In advanced mode you can force
the LCA to switch the laser on or off, independent of the measurement
type. You also have additional optical- and RF- path de-embedding
possibilities, or can apply additional de- embedding on the receiver and
the source side, independent of the measurement type.
Parameters none
Response C#
<string> 0 | 1 (property) Advanced
Example :PAR:ADVA:MODE? -> 0
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide