Class Lcameasparams - Keysight N437 Series Programmer's Manual

1 Remote Operation
Enumeration
EOpticalInput
ERFSwitch
ERFSwitchState

Class LCAMeasParams

Property
Wavelength_nm
WavelengthInt_nm
OpticalPower_dBm
HighPower_Input
MeasMode
ModBiasOptimization
Advanced
24
Description
Enumerates the optical inputs on the optical test head's front panel.
High power input is comparable to input 2 and standard to input 1.
Enumerates the RF switches in a switched LCA system
Enumerates the possible settings of the RF switches
These are common properties of the LCA measurement parameters.
Description
Specify with which laser wavelength the LCA will measure.
Specify with which laser wavelength the LCA will measure. Use this
method when using ExternalInput and the wavelength does not
match any of the internal wavelengths of the test head.
Specify the optical output power of the LCA in dBm
If you are using the high power optical input you have to set the
HighPower_Input property to true.
Specify if you want to do single ended or differential measurements
Specify how often a modulator bias voltage optimization has to be
performed
Enable the possibility to overwrite some of the default behavior of the
LCA. In advanced mode you can force the LCA to switch the laser on
or off independently of the measurement type. You also have
additional Optical- and RF- path deembedding possibilities, or can
apply additional deembedding on the receiver and the source side,
independent of the measurement type.
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
Possible values
NotSet
Standard
HighPower
NotSet
Source
Receiver
UnKnown
Thru
Intern
Type Default value
Enum ELaserWvl NotSet
Integer
Double 0.0
Boolean False
Enum EMeasMode SingleEnded
Enum EModBiasOpt EverySweep
Boolean – if true, False
advanced features
are active