Keysight N437 Series Programmer's Manual page 65

Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
Command :RF:SWITch:STATe?
Syntax :RF:SWITch:STATe?
Description Retrieves the RF switch settings in the LCA test-head. With a non-
switched LCA system, setting this property has no effect.. Reading this
property from a non-switched system will always return Unknown.
Parameters none
Response <string> NotSet | Receiver | Source , Intern | Thru | Unknown
C# (property) RFSwitchState
Example :RF:SWIT:STAT? -> NotSet, Unknown
Command :RF:SWITch:STATe
Syntax :RF:SWITch:STATe<wsp>REC|SOUR,INT|THRU
Description Setting the RF switches in the LCA testhead. With a non switched LCA
system, setting this property has no effect. Trying to set this property to
UnKnown, is ignored. Setting this property for a non switched system will
stay UnKnown.
Parameters <string> RECeiver | SOURce , INTern, THRU
Response none
C# (property) RFSwitchState
Example :RF:SWIT:STAT REC,INT
Command :SOURce[1 – n]:MAXPower?
Syntax :SOURce[1 – n]:MAXPower?
Description Retrieves the maximum optical output power values in dB. The maximum
power for an index n corresponds to the wavelength value from
:SOUR:WAV:ALL? at position n.
Parameters none
Response <double> The maximum power value in dBm. For an invalid index it returns
-200 and there is an entry in the error queue. See :SYST:ERR?.
C# (property) MaxPower_dBm
Example :SOUR:MAXP? -> 6
Remote Operation 1
65