3
Updating the Logic Analyzer
Changing Network Settings
On Windows XP
On Windows 7
34
To make network changes after the first-time power up:
The following steps are applicable for a logic analysis system with
Windows XP operating system:
•
To change from a workgroup to a domain or vice versa, click Start then
right-click on My Computer and select Properties. Select the Computer
Name tab and click Change.
•
To change network connection properties, click Start>Control
Panel>Network Connections. Select the connection you want to change
and click Change settings of this connection.
For more information on changing network settings, refer to the Windows
XP online help.
The following steps are applicable for a logic analysis system with
Windows 7 operating system:
•
To change from a workgroup to a domain or vice versa, click Computer
and select Properties. Click the Change Settings link in the Computer name,
domain and workgroup settings section. Then select the Computer Name tab
and click Change.
•
To change network connection properties, click Start>Control
Panel>Network and Sharing Center. Select the connection you want to
change and then set the properties of this connection.
For more information on changing network settings, refer to the Windows
7 online help.
Keysight 16800 Series Portable Logic Analyzers Installation/Quick Start Guide