Keysight N437 Series Programmer's Manual page 64

1 Remote Operation
64
Command :RF:POWer:FWD
Syntax :RF:POWer:FWD<wsp><power>
Description Sets the RF power on the network analyzer ports for forward
measurements
Parameters power <double> forward power value in dBm
Response none
C# (property) RFPowerFwd_dBm
Example :RF:POWer:FWD -1
Command :RF:POWer:REVerse?
Syntax :RF:POWer:REVerse?
Description Gets the RF power on the network analyzer ports for reverse
measurements.
Parameters none
Response <double> RF reverse power value in dBm.
C# (property) RFPowerRev_dBm
Example :RF:POW:REV? -> -8
Command :RF:POWer:REVerse
Syntax :RF:POWer:REVerse<wsp><power>
Description Sets the RF power on the network analyzer ports for reverse
measurements. To set this property back to the factory defined default
value, set it to Double.NaN or a value < -200dBm.
Parameters power <double> RF reverse power value in dBm.
Response none
C# (property) RFPowerRev_dBm
Example :RF:POW:REV -4
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide