Keysight N437 Series Programmer's Manual page 57

Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
Command :PARameter:RECeiver:ATTenuation?
Syntax :PARameter:RECeiver:ATTenuation?
Description Retrieves the optical attenuation on the receiver path. In default mode only
evaluated for E/O and O/O measurements
Parameters none
Response <double> attenuation value, default unit is dB
C# (property) RcvAttOpt_dB
Example :PAR:REC:ATT? -> 3
Command :PARameter:RECeiver:ATTenuation
Syntax :PARameter:RECeiver:ATTenuation <wsp><attenuation>
Description Specifies the optical attenuation on the receiver path. In default mode only
evaluated for E/O and O/O measurements
Parameters attenuation <double> attenuation value, default unit is dB
Response none
C# (property) RcvAttOpt_dB
Example :PAR:REC:ATT 2
Command :PARameter:RECeiver:PATH:LENGth?
Syntax :PARameter:RECeiver:PATH:LENGth?
Description Retrieves the geometrical length of the receiver path in m. In default mode
only evaluated for E/O and O/O measurements
Parameters none
Response <double> The path length value, default unit is meter. (property)
C# RcvLengthOpt_m
Example :PAR:REC:PATH:LENG? -> 0.3
Remote Operation 1
57