3
Updating the Logic Analyzer
Changing Network Settings
32
On Windows 7
To make network changes after the first-time power up:
The following steps are applicable for a logic analysis system with
Windows 7 operating system:
•
To change from a workgroup to a domain or vice versa, click Computer
and select Properties. Click the Change Settings link in the Computer name,
domain and workgroup settings section. Then select the Computer Name tab
and click Change.
•
To change network connection properties, click Start>Control
Panel>Network and Sharing Center. Select the connection you want to
change and then set the properties of this connection.
For more information on changing network settings, refer to the Windows
7 online help.
On Windows 10
To make network changes after the first-time power up:
The following steps are applicable for a logic analysis system with
Windows 10 operating system:
•
To change from a workgroup to a domain or vice versa, click Control
Panel from the Startup menu, and then click System. Click the Change
Settings link in the Computer name, domain and workgroup settings section.
Then select the Computer Name tab and click Change.
•
To change network connection properties, click Start>Control
Panel>Network and Sharing Center. Select the connection you want to
change and then set the properties of this connection.
For more information on changing network settings, refer to the Windows
10 online help.
Keysight 16860 Series Portable Logic Analyzers Installation/Quick Start Guide