Install The Lca Remote Client - Keysight N437 Series Programmer's Manual

Install the LCA Remote Client

Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
The LCA Remote Client is described in
This installation is not for the LCA itself. (Applications using the remote
NOTE
programming commands can be run on the LCA itself without installing
the remote client package.)
1 1 If not already installed, install the .NET Framework Version 2.0 from
Microsoft. Go to
Microsoft .NET framework'. Be sure to get the framework and all the
service packs. Make sure that you get the framework, not the SDK
(software development kit.)
2 The LCA CD shipped with the LCA contains the Remote Client
Installation Package to install the LCA specific DLLs and the
programming examples. The most recent version of the LCA Remote
Client Installation Package is available from the Keysight web site
(www.keysight.com/find/lca).
• Insert the CD into the CD drive, use Windows Explorer to find LCA
Remote Client Installer Folder, or
• Start the downloaded installer.
3 If you want to program the network analyzer via its COM interface you
need to install the PNAProxy. The installation executable
"PNAProxy.exe" can be found on the network analyzer in the folder:
C:\Program Files\Agilent\Network Analyzer\Automation
(on 32-bit systems)
C:\Program Files (x86)\Agilent\Network Analyzer\
Automation
Install the PNA Proxy by running the installation program
"PNAProxy.exe" on your client machine.
When asked to type in the host name or IP address of the remote
network analyzer during installation, you do not need to type in
anything.
You can specify the host name or IP address during program
development or execution.
Overview
www.microsoft.com
(on 64-bit systems)
Remote Operation
on page -6.
and search for 'How to get the
1
13