Keysight N437 Series Programmer's Manual page 55

Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
Command :PARameter:OPTical:RECeiver:S2PFile?
Syntax :PARameter:OPTical:RECeiver:S2PFile?
Description Returns the name of the s2p file to use for additional adaptor de-
embedding on the receiver side. In default mode, only evaluated for E/O
and O/O measurements.
Parameters none
Response <string> path and file name
C# (property) OptRcvFile
Example :PAR:OPT:REC:S2PF? -> c:\temp\test1.s2p
Command :PARameter:OPTical:RECeiver:S2PFile
Syntax :PARameter:OPTical:RECeiver:S2PFile<wsp>"<path string>"
Description Sets the name of the s2p file which is used for additional adaptor de-
embedding on the receiver side. In default mode only evaluated for E/O
and O/O measurements.
Parameters "<string>" file name and path enclosed in double quotes
Response none
C# (property) OptRcvFile
Example :PAR:OPT:REC:S2PF "c:\temp\test1.s2p"
Command :PARameter:OPTical:S2PFile:USE?
Syntax :PARameter:OPTical:S2PFile:USE?
Description Returns whether the optical paths are described by transmission data
stored in an s2p file. Only the S21 transmission data is used.
Parameters none
Response <string> 1 = s2p file use enabled, 0 = disabled
C# (property) UseIOpticalS2PFile
Example :PAR:OPT:S2PF:USE? -> 0
Remote Operation 1
55