Keysight N437 Series Programmer's Manual page 54

1 Remote Operation
54
Response <double> power value, the default unit is dBm.
C# (property) OpticalPower_dBm
Example :PAR:OPT:OUT:POWer -> -1
Command :PARameter:OPTical:OUTput:POWer
Syntax :PARameter:OPTical:OUTput:POWer<ws><power> description:Specify the
optical output power of the LCA in dBm.
Parameters power <double>, power value in dBm
Response none
C# (property) OpticalPower_dBm
Example :PAR:OPT:OUT:POWer -1
Command :PARameter:OPTical:PATH:DEEMbedding?
Syntax :PARameter:OPTical:PATH:DEEMbedding?
Description Returns whether the whole optical path de-embedding is set on or off.
Parameters none
Response <string> 1 = optical path de-embedding is enabled, 0 = disabled
C# (property) UseOpticalConnData
Example :PAR:OPT:PATH:DEEM? -> 1
Command :PARameter:OPTical:PATH:DEEMbedding
Syntax :PARameter:OPTical:PATH:DEEMbedding<wsp>ON|1|OFF|0
Description Switches the whole optical path de-embedding on or off.
Parameters <string> ON | 1 = enabled optical path de-embedding, OFF | 0 = disable
Response None
C# (property) UseOpticalConnData
Example :PAR:OPT:PATH:DEEM? -> 1
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide