Keysight N437 Series Programmer's Manual page 38

1 Remote Operation
38
ReadOnly LCAProperties As RemoteClient.ILCAProperties3
See the command GetLCAProperties
Parameters No parameters.
ReadOnly CurrentMeasType As RemoteClient.EMeasType
Get the measurement type which has been initialized by the last call to one
of the Init_XX commands or by one of the LoadXXTxCalData commands.
Parameters No parameters.
ReadOnly OperationComplete As Boolean
Get the operation status of the last asynchronously called command.
Exceptions thrown during execution of an asynchronously called command
could be caught when calling WaitForOPC() or OperationComplete().
Parameters No parameters.
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide