Keysight N437 Series Programmer's Manual page 49

Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
Command :PARameter:ADVAnced:MODE
Syntax :PARameter:ADVAnced:MODE<wsp>ON | OFF | 1 | 0
Description Enables or disables advance mode, which allows changing some default
settings. In advanced mode you can force the LCA to switch the laser on or
off, independent of the measurement type. You also have additional
optical- and RF-path de-embedding possibilities, or can apply additional
de-embedding on the receiver and the source side, independent of the
measurement type.
Parameters <string> ON | OFF | 1 | 0 none
Response none
C# (property) Advanced
Example :PAR:ADVA:MODE ON
Command :PARameter:ELECtrical:PATH:DEEMbedding?
Syntax :PARameter:ELECtrical:PATH:DEEMbedding?
Description Retrieves the property which shows whether the whole electrical path
de-embedding is switched on or off.
Parameters none
Response <string> 1 | 0
C# (property)UseElAdaptor
Example :PAR:ELEC:PATH:DEEM? -> 0
Command :PARameter:ELECtrical:PATH:DEEMbedding
Syntax :PARameter:ELECtrical:PATH:DEEMbedding<wsp>ON|OFF|1|0
Description Sets the property which enables or disables the whole electrical path de-
embedding.
Parameters <string> ON | OFF | 1 | 0
Response none
C# (property)UseElAdaptor
Example :PAR:ELEC:PATH:DEEM OFF
Remote Operation 1
49