Upnp Command - Interlogix NS3550-8T-2S User Manual

Chapter 6: Command line mode
Display information about active and alternate firmware images.
Syntax:
Firmware Information
Firmware Swap
Description:
Activate the alternate firmware image..
Syntax:
Firmware Swap

UPnP Command

UPnP Configuration
Description:
Show UPnP configuration.
Syntax:
UPnP Configuration
Example:
Show UPnP configuration.
upnp configuration
NS3552-8P-2S:/>
UPnP Configuration:
===================
UPnP Mode
UPnP TTL
UPnP Advertising Duration : 100
UPnP Mode
Description:
Set or show the UPnP mode.
Syntax:
UPnP Mode [enable|disable]
Parameters:
enable : Enable UPnP
disable: Disable UPnP
(default: Show UPnP mode)
Default Setting:
disable
Example:
Enable the UPnP mode.
upnp mode enable
NS3552-8P-2S:/>
416
: Disabled
: 4
NS3550-8T-2S Industrial Managed Switch User Manual