Ethernet Ring Protection Switching Command - Interlogix NS3550-8T-2S User Manual

Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable Voice VLAN security mode.
disable: Disable Voice VLAN security mode
(default: Show flow Voice VLAN security mode)
Default Setting:
disable
Example:
Enable the Voice VLAN port security mode for port 1-4.
voice vlan security 1-4 enable
NS3552-8P-2S:/>
Voice VLAN Discovery Protocol
Description:
Set or show the Voice VLAN port discovery protocol mode. It only works when auto
detect mode is enabled. The LLDP feature should be enabled before configuring
discovery protocol to 'LLDP' or 'Both'. Change the discovery protocol to 'OUI' or
'LLDP' to restart the auto detect process.
Syntax:
Voice VLAN Discovery Protocol [<port_list>] [oui|lldp|both]
Parameters:
<port_list>: Port list or 'all', default: All ports
OUI : Detect telephony device by OUI address.
LLDP : Detect telephony device by LLDP.
Both : Both OUI and LLDP.
(default: Show Voice VLAN discovery protocol)
Default Setting:
OUI

Ethernet Ring Protection Switching Command

ERPS Command
Description:
Invoking an administrative command for a given protection group
[fs|ms|clear] : setting or clearing an administrative command for a given group
<port> : forced a block on the ring port where this command is issued
<group_id>
Syntax:
Erps command [fs|ms|clear] <port> <group-id>
Parameters:
fs|ms|clear: administrative commands
<port> : Port number
<group-id> : protection group id 1 - 64
ERPS Version
Description:
NS3550-8T-2S Industrial Managed Switch User Manual
: protection group id
Chapter 6: Command line mode
425