Interlogix NS3550-8T-2S User Manual page 443

Parameters:
combined|static|nas|all: VCL User
VCL Protocol-based VLAN Add Ethernet II
Description:
Add VCL protocol-based VLAN Ethernet-II protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Add Eth2 <ether_type>|arp|ip|ipx|at <group_id>
Parameters:
<ether_type>|arp|ip|ipx|at: Ether Type (0x0600 - 0xFFFF)
<group_id>
VCL Protocol-based VLAN Add SNAP
Description:
Add VCL protocol-based VLAN SNAP protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Add Snap <oui>|rfc_1042|snap_8021h <pid> <group_id>
Parameters:
<oui>|rfc_1042|snap_8021h: OUI value (Hexadecimal 00-00-00 to FF-FF-FF).
<pid>
is from 0x0600-0xFFFF.
<group_id>
VCL Protocol-based VLAN Add LLC
Description:
Add VCL protocol-based VLAN LLC protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Add Llc <dsap> <ssap> <group_id>
Parameters:
<dsap> : DSAP value (0x00-0xFF)
<ssap> : SSAP value (0x00-0xFF)
<group_id>: Protocol group ID
VCL Protocol-based VLAN Delete Ethernet II
Description:
Delete VCL protocol-based VLAN Ethernet-II protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Delete Eth2 <ether_type>|arp|ip|ipx|at
Parameters:
<ether_type>|arp|ip|ipx|at: Ether Type (0x0600 - 0xFFFF)
VCL Protocol-based VLAN Delete SNAP
Description:
Delete VCL protocol-based VLAN SNAP protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Delete Snap <oui>|rfc_1042|snap_8021h <pid>
NS3550-8T-2S Industrial Managed Switch User Manual
: Protocol group ID
: PID value (0x0-0xFFFF). If OUI is 00-00-00, valid range of PID
: Protocol group ID
Chapter 6: Command line mode
441