Interlogix NS3550-8T-2S User Manual page 12

Chapter 1: Introduction
Flow Control
Jumbo Frame
Reset Button
Enclosure
Installation
Alarm
LED
Dimensions
Weight
Power Requirement
Power Consumption
ESD Protection
EFT Protection
Layer 2 Functions
Basic Management
Interfaces
Secure Management
Interfaces
Port Configuration
Port Status
Port Mirroring
10
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
9K bytes
< 5 seconds: System reboot
> 5 seconds: Factory Default
IP30 aluminum case
DIN rail kit and wall-mount kit
One relay output for power failure. Alarm relay current carry ability:
1A @ 24 VDC
System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Green)
Ring (Green)
Ring Owner (Green)
Per 10/100/1000T RJ45 Ports:
1000 (Orange)
LNK/ACT (Green)
Per SFP Interface:
1000 (Orange)
LNK/ACT (Green)
187.8 x 135 x 56 mm
720 g
DC 12 to 48 V, 24 VAC power adapter
10 W / 34 BTU (full loading)
6K VDC
6K VDC
Web browser; Remote Telnet, SNMP v1, v2c
SSH, SSL, SNMPv3
Port disable / enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection.
Flow control disable/enable
Power saving mode control
Display each port's speed duplex mode, link status, flow control status, auto-
negotiation status, trunk status.
TX / RX / both
Many-to-1 monitor
NS3550-8T-2S Industrial Managed Switch User Manual