Interlogix NS3550-8T-2S User Manual page 356

Chapter 6: Command line mode
(default : Shows the combined status)
Example:
Show ACL status.
security network acl status
NS3552-8P-2S:/>
Security Network DHCP Relay Configuration
Description:
Show DHCP relay configuration.
Syntax:
Security Network DHCP Relay Configuration
Example:
Show DHCP relay configuration.
security network dhcp relay configuration
NS3552-8P-2S:/>
DHCP Relay Configuration:
=========================
DHCP Relay Mode
DHCP Relay Server
DHCP Relay Information Mode : Disabled
DHCP Relay Information Policy : replace
Security Network DHCP Relay Mode
Description:
Set or show the DHCP relay mode.
Syntax:
Security Network DHCP Relay Mode [enable|disable]
Parameters:
enable : Enable DHCP relaly mode.
When enable DHCP relay mode operation, the agent forward and to transfer
DHCP messages between the clients and the server when they are not on
the same subnet domain. And the DHCP broadcast message won't flood for
security considered.
disable: Disable DHCP relaly mode
(default: Show flow DHCP relaly mode)
Default Setting:
disable
Example:
Enable DHCP relay mode
security network dhcp relay mode enable
NS3552-8P-2S:/>
Security Network DHCP Relay Server
Description:
Show or set DHCP relay server.
Syntax:
Security Network DHCP Relay Server [<ip_addr>]
354
: Disabled
: NULL
NS3550-8T-2S Industrial Managed Switch User Manual