Interlogix NS3550-8T-2S User Manual page 237

The page includes the following fields:
Object
Mode of IP Source
Guard Configuration
Port Mode
Configuration
Max Dynamic Clients
Buttons
• Click Translate Dynamic to Static
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
NS3550-8T-2S Industrial Managed Switch User Manual
Description
Enable/disable the Global IP Source Guard. All configured ACEs will be lost
when the mode is enabled.
Specify on which ports IP Source Guard is enabled. Only when both Global
Mode and Port Mode on a given port are enabled will IP Source Guard be
enabled on this port. All
Specify the maximum number of dynamic clients that can be learned on
given ports. This value can be 0, 1, 2, and unlimited. If the port mode is
enabled and the value of max dynamic client is equal 0, it only allows the
forwarding of IP packets that are matched in static entries on the specific
port. All means that all ports will have one specific setting.
to translate all dynamic entries to static entries.
means that all ports will have one specific setting.
Chapter 4: Web management
235