Interlogix NS3550-8T-2S User Manual page 334

Chapter 6: Command line mode
Example:
Delete SNMPv3 community entry
security switch snmp community delete 3
NS3552-8P-2S:/>
Security Switch SNMP Community Lookup
Description:
Lookup SNMPv3 community entry.
Syntax:
Security Switch SNMP Community Lookup [<index>]
Parameters:
<index>: entry index (1-64)
Example:
Lookup SNMPv3 community entry
security switch snmp community lookup
NS3552-8P-2S:/>
Idx Community
--- --------------------------------
1 public
2 private
Number of entries: 2
Security Switch SNMP User Add
Description:
Add SNMPv3 user entry.
The entry index key are <engineid> and <user_name> and it doesn't allow modify.
Syntax:
Security Switch SNMP User Add <engineid> <user_name> [MD5|SHA]
[<auth_password>] [DES] [<priv_password>]
Parameters:
<engineid>
restricted to 5 - 32 octet string
<user_name>
to. The name of "None" is reserved.
The allowed string length is (1-32), and the allowed content is ASCII
characters from 33 to 126
md5 An optional flag to indicate that this user using MD5 authentication
:
protocol. The allowed length is (8-32), and the allowed content is
ASCII characters from 33 to 126
sha : An optional flag to indicate that this user using SHA authentication
protocol. The allowed length is (8-40), and the allowed content is
ASCII characters from 33 to 126
<auth_password>: A string identifying the authentication pass phrase
des : An optional flag to indicate that this user using DES privacy protocol
privacy protocol should belong to.
The allowed string length is (8-32), and the allowed content is ASCII
characters from 33 to 126
<priv_password>: A string identifying the privacy pass phrase.
The allowed string length is (8-40), and the allowed content is ASCII
332
Source IP
---------------
192.168.0.20
0.0.0.0
: Engine ID, the format may not be all zeros or all 'ff'H and is
: A string identifying the user name that this entry should belong
Source Mask
---------------
255.255.255.0
0.0.0.0
NS3550-8T-2S Industrial Managed Switch User Manual