Interlogix NS3550-8T-2S User Manual page 360

Chapter 6: Command line mode
enable : Enable IP Source Guard
disable: Disable IP Source Guard
Default Setting:
disable
Example:
Enable IP source guard mode
security network ip source guard mode enable
NS3552-8P-2S:/>
Security Network IP Source Guard Port Mode
Description:
Set or show the IP Source Guard port mode.
Syntax:
Security Network IP Source Guard Port Mode [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable IP Source Guard port
disable : Disable IP Source Guard port
(default: Show IP Source Guard port mode)
Default Setting:
disable
Example:
Enable IP source guard port mode for port1~4
security network ip source guard port mode 1-4 enable
NS3552-8P-2S:/>
Security Network IP Source Guard Limit
Description:
Set or show the IP Source Guard port limitation for dynamic entries.
Syntax:
Security Network IP Source Guard limit [<port_list>]
[<dynamic_entry_limit>|unlimited]
Parameters:
<port_list>
<dynamic_entry_limit>|unlimited: dynamic entry limit (0-2) or unlimited
Default Setting:
unlimited
Example:
Set IP source guard limit
security network ip source guard 1 1
NS3552-8P-2S:/>
Security Network IP Source Guard Entry
Description:
Add or delete IP source guard static entry.
Syntax:
Security Network IP Source Guard Entry [<port_list>] add|delete <vid>
<allowed_ip> <allowed_mac>
358
: Port list or 'all', default: All ports
NS3550-8T-2S Industrial Managed Switch User Manual