Interlogix NS3550-8T-2S User Manual page 257

Object
Auto-negotiation
capabilities
Buttons
• Click Auto-refresh
every three seconds.
• Click Refresh to refresh the page immediately.
Neighbor
The LLDP Neighbor Information page provides a status overview for all LLDP
neighbors. The displayed table contains a row for each port on which an LLDP
neighbor is detected.
The page includes the following fields:
Object
Local Port
Chassis ID
Port ID
Port Description
System Name
System Capabilities
Management
Address
NS3550-8T-2S Industrial Managed Switch User Manual
Description
Auto-negotiation Capabilities shows the link partner's MAC/PHY
capabilities.
to refresh the page automatically. Automatic refresh occurs
Description
The port on which the LLDP frame was received.
The identification of the neighbor's LLDP frames.
The identification of the neighbor port.
The port description advertised by the neighbor unit.
The name advertised by the neighbor unit.
System Capabilities describes the neighbor unit's capabilities. The possible
capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the
capability is disabled, the capability is followed by (-).
The neighbor unit's address that is used for higher layer entities to assist the
discovery by the network management. This could, for instance, hold the
neighbor's IP address.
Chapter 4: Web management
255