Interlogix NS3550-8T-2S User Manual page 305

Set 10Mbps (half duplex) speed for port1
port mode 1 10hdx
NS3552-8P-2S:/>
Port Flow Control
Description:
Set or show the port flow control mode.
Syntax:
Port Flow Control [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable flow control
disable : Disable flow control
(default: Show flow control mode)
Default Setting:
Disable
Example:
Enable flow control function for port1
port flow control 1 enable
NS3552-8P-2S:/>
Port State
Description:
Set or show the port administrative state.
Syntax:
Port State [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable port
disable : Disable port
(default: Show administrative mode)
Default Setting:
Enable
Example:
Disable port1
port state 1 disable
NS3552-8P-2S:/>
Port Maximum Frame
Description:
Set or show the port maximum frame size.
Syntax:
Port MaxFrame [<port_list>] [<max_frame>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<max_frame>: Port maximum frame size (1518-9600), default: Show maximum
frame size
Default Setting:
NS3550-8T-2S Industrial Managed Switch User Manual
Chapter 6: Command line mode
303