Shortening the Leading/Trailing Edge Margins
Depending on the paper being used, the margins on the copy vary. You can shorten the leading/trailing
edge margins.
Leading-edge margin
Paper feed direction
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Registering a Custom Paper", Paper Settings.
• The adjusted margin cannot be applied to masked images that are solid-filled or contain ruled lines
at the leading/trailing edges.
• Reducing the leading/trailing edge margin may result in a paper jam on the fusing belt stripper
plate.
1.
In [Advanced Settings] for the custom paper, reduce the value by 0.5 mm in 013: [Erase
Margin: Leading Edge] or 014: [Erase Margin: Trailing Edge].
2.
Keep reducing the value by 0.5 mm, checking that paper is not jammed.
Trailing-edge margin
CEZ586
Shortening the Leading/Trailing Edge Margins
161