9. Post-Processing Option Troubleshooting
If "Off" is selected, change the value to "Weak". If "Weak" is selected, change the value
to "Medium". If "Medium" is selected, change the value to "Strong".
Coated paper is being used.
In the 06: [Finishing: Finisher] group on the [Adjustment Settings for Skilled Operators] menu,
set 0617: [Adjust Output Fan Level] to [Increase Air Volume].
Standard paper is being used.
1. In the 06: [Finishing: Finisher] group on the [Adjustment Settings for Skilled Operators]
menu, set 0615: [Output Trail Edge Press Setting] to [On].
2. In the 06: [Finishing: Finisher] group on the [Adjustment Settings for Skilled Operators]
menu, set 0616: [Output Fan Setting] to [On].
<One sheet pushing out another or sheets becoming crimped>
Sheets are curled downward.
1. Load the sheets the other way up.
2. Print the image. Has the problem been resolved?
Yes
No
3. In the 03: [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Skilled
Operators] menu, select 0301: [Adjust Paper Curl] and specify "Adjust
If "Off" is selected, change the value to "Weak". If "Weak" is selected, change the value
to "Medium". If "Medium" is selected, change the value to "Strong".
Coated paper is being used.
In the 06: [Finishing: Finisher] group on the [Adjustment Settings for Skilled Operators] menu,
set 0617: [Adjust Output Fan Level] to [Increase Air Volume].
Standard paper is being used.
1. In the 06: [Finishing: Finisher] group on the [Adjustment Settings for Skilled Operators]
menu, set 0615: [Output Trail Edge Press Setting] to [On].
2. In the 06: [Finishing: Finisher] group on the [Adjustment Settings for Skilled Operators]
menu, set 0616: [Output Fan Setting] to [On].
Trailing Edge of Stapled Sheets Close to the Paper Exit
Cause:
If the stapled sheets are curled strongly or become limp after delivery, the trailing edge of the sheets
may be too close to the paper exit when the paper is stacked.
128
Finished!
Go to the next step.
Curl".