Uneven Glossiness Due To Cooling - Ricoh Pro C9100 Operating Instructions Manual

7. Image Quality Problem: Full Page
Solution:
1. In [Advanced Settings] for the custom paper, increase all the value in 018: [Maximum
Image Density: K], 019: [Maximum Image Density: C], 020: [Maximum Image Density:
M] and 021: [Maximum Image Density: Y] by one step.
2. Print the image. Has the problem been resolved?
Yes Finished!
No Increase the value an additional one step.
3. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
4. In [Advanced Settings] for the custom paper, adjust the fusing heat roller temperature.
<Printing in full color>
Decrease the value in 088: [Fusing Temp: FC] by 5 degrees.
<Printing in black and white>
Decrease the value in 089: [Fusing Temp: BW] by 5 degrees.
5. Print the image. Has the problem been resolved?
Yes Finished!
No Decrease the temperature an additional 5 degrees. If the problem persists, contact
your service representative.

Uneven Glossiness due to Cooling

Image-defect-like glossy streaks appear randomly.
88
DFT026