Delivered Sheets Are Not Aligned - Ricoh Pro C9100 Operating Instructions Manual

9. Post-Processing Option Troubleshooting
No Set 0301: [Adjust Paper Curl] to [Adjust
5. Print the image. Has the problem been resolved?
Yes Finished!
No Contact your service representative.

Delivered Sheets Are Not Aligned

Cause:
When sheets are delivered to the stacker tray, because of paper-to-paper friction, the paddle fails to
pull the trailing edge back into the front guide, resulting in misalignment.
The paper edge stopper also fails to push back the protruding leading edge.
This may occur if:
• Thick (280 g/m
<How the problem occurs>
1. An uncurled sheet is delivered to the stacker shift tray.
Paper edge
stopper
2. Strong friction occurs on the trailing edge so that the paddle cannot pull the sheet back and
align the edges of the sheet with those of the stack.
148
2
[105 lb. Cover] or heavier), uncurled A3 or larger paper is used.
Paper exit
Paddle
Stacker shift tray
Paper feed direction
Curl: Strong].
CEZ577