10. Improving Throughput; Reducing The Waiting Time Prior To Printing - Ricoh Pro C9100 Operating Instructions Manual

10. Improving Throughput

Reducing the Waiting Time Prior to Printing

After receiving a print job, the machine usually stops to let the fusing temperature reach an appropriate
level for printing.
The waiting time for the fusing unit to cool down may be quite long, especially before printing on thin
paper. By decreasing the fusing temperature during standby, you can reduce the waiting time.
By changing the fusing temperature to feed paper after warm-up, you can also reduce the waiting time.
• When printing on paper other than thin paper, we recommend leaving the fusing temperature
settings unchanged.
• After performing the solution, it is recommended to perform the color calibration of the external
controller. For details see, page 159 "Operating Procedure for Color Calibration".
1. In the 02: [Machine: Image Quality] group on the [Adjustment Settings for Skilled
Operators] menu, select 0206: [Adjust Fusing Temperature on Standby].
2. Decrease the temperature by 15 degrees.
155