Erasing Center And Edge Margins - Ricoh VT6000 Manual

Erasing Center And Edge Margins

When printing from thick books, or similar originals, the binding margin at
the center and the edges might appear on prints. To prevent this, follow the
steps on the next page.
The 1 mm, 0.02" margins on all four sides of the original will be erased. The
width of the margins will change depending on the reduction ratios.
Shadows near the book edge might not be erased completely.
If the shapes of the originals are as below, shadows might appear on the prints.
In this case, make a master with the platen cover closed.
If there is a line or solid image on the margin and you erase the center and the
edges, the image might be erased as shown below. In this case, use the func-
tion described on page 39.
Setting direction
Setting direction
OPERATION
37