Paper Edges Are Stained (1) - Ricoh Pro C9100 Operating Instructions Manual

9. Post-Processing Option Troubleshooting
When coated or other paper producing higher paper-to-paper friction is used, the paper edges are not
aligned properly, resulting in misaligned stapling.
This may occur if:
• Coated or other paper producing higher paper-to-paper friction is used.
• Thin or other limp paper is used.
Solution:
Reduce the number of sheets to be stapled.
1. In the 06: [Finishing: Finisher] group on the [Adjustment Settings for Skilled Operators]
menu, select 0606: [Number of Sheet Align for Stapling], and reduce the number of
sheets to be stapled.
2. Print the image. Has the problem been resolved?
Yes Finished!
No If the problem persists even though the setting has reached its minimum value, contact
your service representative.
• If the number of sheets to be stapled is reduced, paper alignment will take longer, compromising
the machine's throughput.

Paper Edges Are Stained (1)

Cause:
While upward curls are removed, toner adhesion becomes insufficient when the fusing pressure roller is
applied to the paper, making the anti-static brush stained with toner.
This may occur if:
• Downward curled paper is used.
• Sheets are delivered with their printed side facing up in the post-processing machine.
130