Cleaning the Paper Feed Path
Paper dust sticking to the paper transfer guide plate, roller, paper feed roller, or sensor may cause white
spots, paper jam, or double feeding. Clean the paper feed path from the paper tray to the paper exit in
the drawer.
• Turn off the main power before performing the operations described in this manual. See "Turning
Off/On the Power", Replacement Guide.
Guide Plate
Wipe the guide plate with a well-wrung-out damp cloth. To clean the innermost recesses, use a
cloth that is as large as your palm.
Roller
Wipe the roller with a well-wrung-out damp cloth, and then wipe with a dry, unused, lint-free cloth
until no moisture remains.
Paper Feed Roller
Wipe the entire surface of the paper feed roller lengthwise with a well-wrung-out damp cloth, and
then wipe with a dry, unused, lint-free cloth until no moisture remains.
CZC348
CZC349
Cleaning the Paper Feed Path
113