The Machine Wrongly Detects That The Tray Is Full - Ricoh Pro C9100 Operating Instructions Manual

The Machine Wrongly Detects That the Tray Is Full

Cause:
Depending on the paper size, the machine may detect that the shift tray has reached the maximum
number of sheets that can be stacked on it.
This may occur if:
• Paper with a width of 191–261 mm (7.6-10.4 inches) is being used.
Solution:
1. Load the sheets the other way up.
2. Print the image. Has the problem been resolved?
Yes Finished!
No In the 03: [Machine: Paper Feed/ Output] group of the [Adjustment Settings for Skilled
Operators] menu, set 0301: [Adjust Paper Curl] to [Adjust
3. Print the image. Has the problem been resolved?
Yes Finished!
No Set 0301: [Adjust Paper Curl] to [Adjust
4. Print the image. Has the problem been resolved?
Yes Finished!
No Set 0301: [Adjust Paper Curl] to [Adjust
5. Print the image. Has the problem been resolved?
Yes Finished!
No Set 0301: [Adjust Paper Curl] to [Adjust
6. Print the image. Has the problem been resolved?
Yes Finished!
No Set 0301: [Adjust Paper Curl] to [Adjust
Curl: Off].
Curl: Weak].
Curl: Medium].
Curl: Strong].
Curl: Weak].
High Capacity Stacker
151