Z-Folding Is Not Performed Properly - Ricoh Pro C9100 Operating Instructions Manual

9. Post-Processing Option Troubleshooting
3. Print the image. Has the problem been resolved?
Yes Finished!
No Contact your service representative.

Z-Folding is Not Performed Properly

Cause:
If a sheet is curled and its edge touches the guide plate, proper folding may not be possible.
This may occur if:
Upward curl (radius 4 cm [1.6 in.] or less)
on the leading edge of delivered paper.
Paper feed direction
Solution:
1. Load the paper the other way up.
2. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
3. In the 03: [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Skilled
Operators] menu, set 0301: [Adjust Paper Curl] to "Adjust
To control the level of decurling, select "Weak" if the present setting is "Off", "Medium" if the
present value is "Weak" or "Strong" if the present value is "Medium".
4. Print the image. Has the problem been resolved?
Yes Finished!
142
DFP800
Curl".