11. Advanced Instructions
Press [+] to increase the scaling. (Press [−] to reduce the scaling.)
The adjustment value is applied evenly both upward and downward.
To feed A3 paper with its short side parallel to the paper feed direction, increase the value by
0.025 percentage point to move the image by approximately 0.1 mm (0.004 inches).
6.
Select 008: [Magnification: With Feed: Side 2] and adjust the horizontal image scaling on
Side 2 of the paper to match the image scaling on Side 1.
Eg., Adjusting magnification to match the position of the arrow (a) on the trailing edge of the paper
on Side 2 to the position of the arrow (b) on Side 1
Press [+] to increase the scaling. (Press [−] to reduce the scaling.)
174
DFT318
DFT319
DFT320