If (J098) Appears - Ricoh Pro C9100 Operating Instructions Manual

If (J098) Appears

Cause:
Sheets cannot be positioned properly by image position adjustment.
Solution:
Depending on the cause of the problem, do one of the following:
The side fences in the paper trays are not positioned correctly.
Adjust the side fences to match the paper width.
When you close the paper tray, the side fences may become misaligned due to the weight of the paper.
To prevent this, close the paper tray slowly.
For details about loading paper, see "Loading Paper", About This Machine.
The paper size/orientation/type is not specified correctly.
In tray paper settings, specify the size, orientation, and type of the paper in use.
For details about tray paper settings, see "Changing Tray Paper Settings", Paper Settings.
Sheets of mixed type, thickness, or color are loaded in the paper tray.
Load identical sheets in the paper tray.
When printing from a tray containing sheets of mixed color, you can prevent paper misfeeding by
specifying the following settings:
To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Registering a Custom Paper", Paper Settings.
<If custom paper is used>
1. In [Advanced Settings] for the custom paper, set 115: [Ppr Edge Detection: Sensing Duration]
to [Long Time].
2. Print the image.
3. If the problem persists, set 118: [Registration Adjustment: Across Feed] to [Activate].
4. Print the image.
5. If the problem persists, set 015: [Skew Detection] to [Off].
Colored paper or transparencies are loaded in the paper tray.
Paper edges may not have been detected correctly.
Adjust the color paper edge detection.
The Jam Code Appears
103