Ricoh Pro C9100 Operating Instructions Manual page 162

11. Advanced Instructions
• Click [Print].
14. When patch printing is completed, click [Measure] in the [4. Get Measurements] menu.
15. Check that the page type and size are correct, and then click [Measure].
16. Check the printed patches using ES-2000.
17. After checking all the patches, select [Measurement vs. Target] in the [6. View
Measurements (optional)] menu, and then click [View].
18. Using the "Measurement vs. Target" screen, calculate the difference between each color's
D-Max value in the measurement column and that in the target column.
• If the difference is equal to +0.3 or lower and -0.3 or higher for cyan, magenta, and black, or
if the difference is equal to +0.1 or lower and -0.1 or higher for yellow, go to the next step.
• If the difference is equal to +0.31 or higher and -0.31 or lower for cyan, magenta, and
black, or if the difference is equal to +0.11 or higher and -0.11 or lower for yellow, return to
Step 1.
19. Click [Done] two times to close "Calibrator" dialog box.
• After this procedure is repeated three times, the difference between each color's [D-Max] value in
the measurement column and that in the target column may not be equal to +0.3 or lower and -0.3
or higher for cyan, magenta, and black, or +0.1 or lower and -0.1 or higher for yellow. If this is the
case, print solid images on both sides of 100 sheets of A4 or LTR paper continuously. Desired
results may be obtained.
• If the difference between each color's [D-Max] value in the measurement column and that in the
target column may not be equal to +0.3 or lower and -0.3 or higher for cyan, magenta, and black,
or +0.1 or lower and -0.1 or higher for yellow, color reproducibility may be improved after
printing solid images on both sides of 100 sheets of A4 or LTR paper continuously.
160