Danfoss VLT Automation Drive FC 360 Programming Manual page 27

Parameter Descriptions
0-51 Set-up Copy
Option: Function:
[0] No copy No function.
*
[1] Copy from Copy from set-up 1 to set-up 2.
setup 1
[2] Copy from Copy from set-up 2 to set-up 1.
setup 2
[9] Copy from Copy factory setting to programming set-
Factory setup up (selected in parameter 0-11 Programming
Set-up).
4.1.7 0-6* Password
0-60 Main Menu Password
Range: Function:
0 [0 - 999 ] Define the password for access to the Main Menu
*
via the [Main Menu] key. Setting values to 0
disables the password function.
MG06C602
Programming Guide
Danfoss A/S © 7/2015 All rights reserved.
4 4
25