Danfoss VLT Automation Drive FC 360 Programming Manual page 122

Parameter Descriptions
37-57 Tension On/Off
Turns the tension controller on or off.
Option:
[0]
*
[1]
37-58 Core Select
Selects 1 of the 2 preset core sizes.
4 4
Option:
[0] Core1 diameter
*
[1] Core2 diameter
37-59 Diameter Reset
Resets the diameter to a new value. If the new diameter select is
energised, the partial core diameter value is used, otherwise the
diameter is reset to core1 or core2 values based on the selected
core.
Option:
[0]
*
[1]
120
®
VLT
Function:
Off
On
Function:
Function:
Off
On
Danfoss A/S © 7/2015 All rights reserved.
AutomationDrive FC 360
MG06C602