Oce VarioPrint i Series Operation Manual page 293

Action
2 Press the connector of the full container and dis-
connect the supply tube from the cap.
3 Take out the full container.
4 Unscrew the caps of the full and empty container, swap the caps and fasten them.
5 Place the empty container in the tray.
6 Press the connector and carefully connect the
supply tube to the cap of the empty container.
7 Carefully close the door of the waste compartment.
After you finish
Dispose the container according to the safety regulations as delivered with your product.
Replace the ColorGrip waste container
Chapter 12 - Maintain the printer 293