Table of Contents
Advertisement
Perform a colour validation test
6. Select the colour validation test.
7. Select [Only print target].
8. The printer prints and delivers the charts. They arrive in the top tray of the high capacity
stacker.
9. Finish the procedure.
10. Put the target charts on a place to dry.
Measure the charts
When the charts are completely dry, you measure the charts with an i1 spectrophotometer. Read
the instruction in
1. Touch [System]→[Media].
2. Select the media.
3. Select the colour validation test.
4. Select [Only measure target].
266
Chapter 10 - Print what you expect
Calibrate a media family on page 237
how to use the i1 spectrophotometer.
Advertisement
Table of Contents
