Table of Contents
Advertisement
Load media
Action
1
Open the paper tray via the schedule, the trays view or the button on the control panel of
the paper module. Only one tray can be open at the same time.
You can open a paper tray when the printer is printing. The paper tray opens as soon as
possible. When the same media are also available in an other paper tray, the print process
continues. When there are no other paper trays that hold these media, the print process
stops.
2
When the paper tray does not contain media, continue with step 6.
When media have a different size than the latest loaded media, continue with step 3.
When media have a same size as the latest loaded media, continue with step 9.
3
Turn the knob in anti-clockwise direction to
move the side sliders away from the loaded
stack.
4
Squeeze the green handle of the front slider to
move the trailer-edge sliders away from the
stack.
5
Remove the stack. Carefully rewrap the remaining media in the original package material or
other moisture proof material. Use the original package orientation.
6
Take a new stack of media for loading.
Use the direction of the arrow on the packaging
label to load the sheets face-up in the paper
tray.
Carefully put the stack in the middle of the paper
tray, aligned against the left-hand guide plate.
Load media into the paper module
Chapter 5 - Job media handling
4
81
Advertisement
Table of Contents
