Table of Contents
Advertisement
Replace a container in the ink cabinet with drawers
Procedure
Action
1
Use both hands to carefully open the tray of the ink cabinet.
2
The LEDs of containers that are empty are off.
Press the connector of the supply tube of the
empty container and disconnect the tube.
3
Take out the empty container and place the empty container next to the full container.
4
Unscrew, swap and fasten the caps of both con-
tainers.
5
Place the full container in the tray.
6
Carefully connect the supply tube.
7
Press the green button to confirm that you
placed a full container.
The LED blinks slowly for about 10 seconds
while the RFID tag of the container is read. Then
the LED remains on.
288
Chapter 12 - Maintain the printer
NOTE
When the LED continues to blink fast,
there is important information that you
need to read on the control panel.
4
Advertisement
Table of Contents
