Edit A Colour Bar - Oce VarioPrint i Series Operation Manual

Edit a colour bar

Edit a colour bar
Colour bars are colour control strips to verify the colour quality of the prints. The colour bar uses
the print settings of the media definition.
The bar is printed in the trim area of a page. Duplex sheets get the bar at both sides and simplex
sheets at the print side.
There are four factory defined colour bars:
• FOGRA CMYK Media Wedge 2008 Version V2.2a Proof
• FOGRA CMYK Media Wedge 2008 Version V3.0a Proof
• FOGRA CMYK Media Wedge 2008 Version V3.0b Proof
• IDEAlliance Control Strip 2009
NOTE
You cannot create your own colour bars.
1. Open the Settings Editor and go to: [Colour]→[Colour & information bars].
[218] Location of colour and information bars
2. Select the colour bar.
[219] Default colour bars
3. Click [Edit].
4. Change the name and description.
5. Click [OK].
Chapter 9 - Manage colour definitions 203