Table of Contents
Advertisement
Learn about media family calibration
PRISMAsync Print Server
Media family
calibration
Output
Print
C' Y' M' K'
engine
Calibration
curves
Input
C M Y K
Lab
Output profile
[250] Calibration curves
During the media family calibration PRISMAsync Print Server calculates the differences between
the measured values and the target (output profile) values for each of the C, M, Y, and K channel
colours. At the time the output profile was created, the CMYK values calculated by the output
profile exactly matched the measured Lab values of the colours that were printed on the media.
The calibration curves that the media family calibration creates will compensate for the identified
Creation of calibration curves on page
differences. (
379)
Calibration charts
The media family calibration wizard informs you how you must perform the procedure. The
media family procedure prints calibration charts on target media. The charts represent the actual
colour behaviour on the front side and the back side of the media of that media family. The
calibration chart has solid patches (100% primary colour) and patches with tones (from 0% to
100%j primary colour).
Your measure charts with the i1-spectrophotometer. (
Measure charts with the i1
spectrophotometer on page
247)
Chapter 10 - Print what you expect
235
Advertisement
Table of Contents
