Table of Contents
Advertisement
Action
4
1. Take five cleaning cloths and half-fold the
cloths.
2. Move the folded cloths three times over the
lower sensors.
5
Take five new cleaning cloths, half-fold the
cloths and move the folded cloths three times
over the upper sensors.
6
Gently close the Z-sensor unit.
7
Use the green handle to close the paper guide.
8
Close the front door of the registration input module.
After you finish
Dispose the used cleaning cloths.
NOTE
You cannot easily get access to the
lower Z-sensors.
NOTE
You cannot easily get access to the up-
per Z-sensors.
Clean the Z-sensors in the registration input module (Z2)
Chapter 12 - Maintain the printer
311
Advertisement
Table of Contents
